Contrast Test

Contrast Test

Measure your display's contrast ratio and dynamic range. Test shadow detail, black levels, and white clipping in one fullscreen sweep.

Contrast Checker
Count visible squares (0-16)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Last visible: 8
Test Mode
Active modeShadow Detail
Visible squares8 / 16
Stage bgBlack

Each square grows slightly brighter from black. Count how many you can distinguish.

Panel Contrast
TN (600:1)600:1
IPS (1000:1)1000:1
VA (3000:1)3000:1
OLED (∞)3000:1
Scoring Guide
14–16 visibleExcellent
10–13 visibleGood
6–9 visibleFair
3–5 visiblePoor
0–2 visibleBad
Assessment
⚠
Fair · 8 / 16
Shadow or highlight detail is being crushed
Calibration hintOK
Black crushYes

Why use this contrast tool

Shadow ramp pattern

21-step ramp from black to white reveals crushed shadows and clipped highlights with precise level markers.

Checkerboard contrast

Alternating black/white checkerboard stresses your panel's actual contrast, not just sequential measurements.

ANSI contrast mode

16-zone black/white grid measures simultaneous contrast, which is what your eye actually sees in mixed content.

Brightness ramp

Toggle 0-100% backlight to see how contrast scales with brightness on LCD panels.

What is contrast

Contrast ratio is the difference between the darkest black and brightest white a display can show, expressed as a ratio like 1000:1 or 1,000,000:1. Higher contrast means deeper blacks, brighter highlights, and more perceived image depth. It is the single most important display spec for perceived image quality.

There are two ways to measure contrast. Sequential (native) contrast measures a full-screen black versus a full-screen white — best case for the panel. ANSI contrast measures a 16-zone checkerboard of black and white simultaneously — closer to real-world content. ANSI is always lower than sequential because backlight uniformity limits simultaneous contrast.

Panel type matters enormously. IPS typically delivers 1000:1, VA delivers 3000:1-6000:1, and OLED delivers effectively infinite:1 because each pixel turns fully off for black. Mini-LED with local dimming can reach 1,000,000:1 ANSI by dimming zones independently, though blooming remains a tradeoff.

How to test

  1. Step 1: Darken the room

    Contrast perception depends on ambient light. Test in a dim room for consistent results.

  2. Step 2: Set native brightness

    Use 100% brightness for the shadow ramp to maximize highlight headroom. Back off for daily use.

  3. Step 3: Run the shadow ramp

    Count how many distinct steps you see between pure black and dark grey. Each visible step is a contrast level your panel can render.

  4. Step 4: Switch to ANSI checkerboard

    This reveals simultaneous contrast — the real-world performance. Note any blooming around white squares on black backgrounds.

  5. Step 5: Compare to spec

    Most panels show 8-12 visible shadow steps. OLED shows 20+; cheap IPS may show only 6.

Common causes of contrast issues

Panel type limits

IPS is capped near 1000:1 by liquid crystal leakage. VA reaches 3000:1+. OLED is effectively infinite because pixels turn off.

Backlight uniformity

Edge-lit LCDs can't dim specific zones, killing ANSI contrast. Full-array local dimming fixes this but adds blooming.

Brightness too high

Running LCD at 100% brightness raises black levels proportionally, lowering perceived contrast. Aim for 120-150 nits for dark rooms.

Ambient light

Room light reflects off the panel, raising effective black level. Even a perfect OLED looks grey in a bright room.

Frequently asked questions

Testing tips

  • Test in a dim room — ambient light raises effective black level and masks contrast differences.
  • Use ANSI checkerboard mode, not just sequential, for realistic contrast performance.
  • Lower brightness to 30-40% for dark room viewing — running at 100% raises black levels.
  • Compare shadow steps visible to spec; OLED shows 20+ steps, IPS 8-12, cheap TN as few as 6.

Related tools

Contrast Ratio: The Most Important Display Spec Nobody Talks About

When you compare two monitors, what specs do you check? Resolution, refresh rate, maybe response time. But the single biggest factor in perceived image quality — the spec that separates a great display from a mediocre one — is contrast ratio. And almost nobody talks about it.

Contrast ratio is the difference between the darkest black and the brightest white a display can show. A 1000:1 contrast panel can render white 1000 times brighter than its black; a 1,000,000:1 panel can render white a million times brighter. The higher the ratio, the deeper the blacks, the brighter the highlights, and the more three-dimensional the image feels. Low-contrast panels look flat and washed out, no matter how high the resolution.

Panel type dictates contrast. IPS panels top out around 1000:1 because their liquid crystals leak some light even in the "closed" state. VA panels reach 3000:1-6000:1 by stacking crystals vertically, blocking more light. OLED is effectively infinite because each pixel emits its own light and turns fully off for black. The visual difference between a 1000:1 IPS and an infinite-contrast OLED is enormous — far larger than the difference between 4K and 1440p at normal viewing distance.

LCD manufacturers try to close the gap with local dimming. A full-array backlight with hundreds of dimming zones can turn off the LEDs behind dark parts of the image, simulating OLED-like blacks. Mini-LED displays take this further with thousands of zones. The result is contrast that approaches OLED — but with a tradeoff called blooming, where bright objects on dark backgrounds have visible halos. Run the contrast test in ANSI checkerboard mode to see blooming on your display.

Marketing numbers can be misleading. "Dynamic contrast" ratios of 100,000,000:1 are meaningless — they measure the panel at minimum brightness versus maximum, with no actual simultaneous rendering. ANSI contrast (a 16-zone checkerboard) is the honest number, but few manufacturers publish it. Read independent reviews from RTings, TFTCentral, or PCMag for real measurements.

For dark-room movie watching or HDR gaming, OLED is unmatched. For a bright office, IPS is fine — contrast matters less when ambient light raises the effective black floor. Use our black level test and OLED screen test alongside the contrast test to understand your panel's complete dynamic range performance. Choose the panel type that matches your viewing environment, not the spec sheet.

Run the contrast test now

Free, no download, runs in any browser.

Browse all tools