uniformity test

Uniformity Test

9-zone brightness uniformity detection. Evaluate brightness range, uniformity, and dimming method across your entire panel.

Uniformity Test

Multi-zone brightness uniformity check. Detect hotspots, dark corners, and color shifts across your panel.

Shortcuts
Switch color
← →
Fullscreen
F
Exit
Esc

TV users can use remote arrow keys

Color Picker
12 presets · custom hex
Features

Why choose our Uniformity Test

01

9-Zone Grid

Panel divided into a 3×3 grid. Each zone is tested for brightness and color consistency. Hotspots and dark corners are immediately visible.

02

Multi-Color Test

Test uniformity on white, gray, red, green, and blue backgrounds. Color uniformity issues are often more visible than brightness uniformity issues.

03

Gradient Background

Full-screen smooth gradient reveals uniformity issues that solid colors miss. Look for visible bands or color shifts across the screen.

04

Corner Focus

Corners are the most common location for uniformity issues due to backlight placement. Dedicated corner inspection makes defects easy to spot.

Background

What is uniformity?

Uniformity refers to how consistent the brightness and color of a display are across its entire surface. A perfectly uniform screen shows the same brightness and color in the center as in the corners. Real screens always have some variation — typically 10-20% brightness difference between the brightest and darkest zones on IPS and VA panels.

Uniformity issues are caused by uneven backlight distribution. Edge-lit LCDs (most monitors) have backlights along the edges, which can create brighter edges and a darker center, or vice versa. Full-array backlights distribute light more evenly but are thicker and more expensive. OLED panels have per-pixel light emission and essentially perfect uniformity.

Color uniformity is separate from brightness uniformity. A panel may have consistent brightness but show color shifts — e.g., the left side has a slight pink tint while the right side has a slight green tint. This is caused by uneven color filters or backlight color temperature variation. Professional color work requires both brightness and color uniformity within 2-3%.

Step-by-step

How to test

  1. 1

    Display a solid white fullscreen

    Click the White preset and go fullscreen. Allow your eyes a few seconds to adjust to the brightness.

  2. 2

    Inspect the 3×3 grid zones

    Compare the brightness of each zone. The center should be the brightest; corners and edges may be slightly dimmer. Variation up to 15% is normal; more than 25% is noticeable in real content.

  3. 3

    Check for color shifts

    Switch to gray and then each primary color. Look for any color tint differences between zones. Even small color shifts can be visible in color-critical work.

  4. 4

    Test the gradient

    Display the smooth gradient. Any visible banding or color shifts across the screen indicate uniformity issues. Compare against the same gradient on a known-good reference display.

Root causes

What causes uniformity?

Edge-Lit Backlight

Most modern monitors are edge-lit — the backlight sits along one or more edges. This creates brightness variation, especially in the center opposite the light source.

Panel Pressure

An overly tight bezel can compress the panel and create bright or dark pressure spots, usually near the edges.

Backlight Aging

LED backlights age unevenly over years of use. A monitor that was uniform when new may develop hotspots or dim zones after 3-5 years.

Manufacturing Variation

Even with identical design, two monitors of the same model may have different uniformity due to manufacturing tolerance. This is the panel lottery.

Questions

Uniformity Test FAQ

Best practices

Testing tips

  • ▸Set brightness to a comfortable level (30-50%) — at max brightness, uniformity issues become more visible.
  • ▸Test in a dim room to reduce ambient light reflection that can mask uniformity issues.
  • ▸If your monitor has Uniformity Compensation in the OSD, try enabling it — this can reduce variation at the cost of peak brightness.
  • ▸Compare the center of the screen against each corner — corners are most likely to have issues on edge-lit panels.
  • ▸For color-critical work, calibrate with a colorimeter that supports uniformity compensation.
Continue testing

Related tools

Start testing your screen now

Use the uniformity test above to check your display. No download, no signup.

Browse other tools