Color Depth Test
Verify whether your display is 6-bit, 8-bit, or 10-bit. Reference ramps and dithering patterns reveal your panel's true bit depth and FRC behavior.
Why use this color tool
Bit depth reference ramps
256-step and 1024-step ramps let you visually compare 8-bit vs 10-bit smoothness side by side.
FRC detection
Reference dithering patterns reveal whether your panel is true 8-bit or 6-bit + FRC faking 8-bit.
Per-channel test
Test each RGB channel individually to spot per-channel bit depth variations (rare but possible).
GPU pipeline check
Instructions for verifying 10-bit output through the full GPU-to-display pipeline.
What is color
Color depth is the number of bits used to represent each color channel. A 6-bit panel renders 64 levels per channel (2^6 = 64), an 8-bit panel renders 256 levels (2^8 = 256), and a 10-bit panel renders 1,024 levels (2^10 = 1,024). With three RGB channels, that's 262,000 / 16.7 million / 1.07 billion total colors. Higher bit depth means smoother gradients and fewer visible bands.
Many budget monitors use 6-bit + FRC panels, where FRC (frame rate control) is temporal dithering that rapidly flickers pixels between adjacent levels to simulate intermediate shades. From a normal viewing distance, FRC is invisible, making the panel look like 8-bit. But the underlying panel is still 6-bit, and the 1024-step ramp reveals the truth.
HDR requires 10-bit. HDR's wider brightness range makes 8-bit quantization glaring — dark HDR scenes show severe banding. A display marketed as "HDR" without 10-bit is fake HDR; the display can accept HDR signals but cannot render them properly. Look for true 10-bit panels for HDR work.
How to test
Step 1: Display the 256-step ramp
Open the test and select 256 levels. A ramp from black to white fills the screen.
Step 2: Look for banding
Visible bands indicate 6-bit or 8-bit limits. A perfectly smooth ramp indicates 10-bit depth.
Step 3: Switch to 1024-step
If available, switch to 10-bit mode. The ramp should look noticeably smoother if your display is 10-bit.
Step 4: Check FRC
Look at the dithering reference patterns. If you see flickering or noise, your panel is 6-bit+FRC, not true 8-bit.
Step 5: Verify GPU output
Open your GPU control panel and ensure 10-bit output is enabled (if your display supports it).
Common causes of color issues
6-bit panel hardware
Cheapest panels use 6-bit crystals with FRC dithering. Cannot render true 8-bit gradients; banding visible in wide ramps.
8-bit panel hardware
Most consumer monitors. Fine for SDR but shows banding in HDR content and dark gradient scenes.
10-bit panel hardware
Professional and HDR displays. Required for HDR, photo editing, and video grading. Look for true 10-bit, not 8-bit+FRC.
GPU output limits
GPU must output 10-bit signal via DisplayPort 1.4 or HDMI 2.0+. Older cables limit to 8-bit even with 10-bit panel.
Frequently asked questions
Testing tips
- Use DisplayPort 1.4 or HDMI 2.0+ for 10-bit output at high resolutions.
- Enable 10-bit output in your GPU control panel for HDR work.
- Use color-managed applications (Photoshop, DaVinci Resolve) for 10-bit content.
- Compare 256-step and 1024-step ramps to confirm true 10-bit panel depth.
Related tools
Color Depth Explained: 6-bit vs 8-bit vs 10-bit Panels
Color depth is one of the most misunderstood display specs. You'll see "8-bit", "10-bit", "6-bit + FRC", and "1.07 billion colors" on monitor boxes, often without clear explanation. Understanding color depth is essential for choosing the right panel for your work — and for spotting marketing that oversells budget displays.
Color depth is the number of bits used to represent each color channel. A 6-bit panel renders 64 levels per channel (2^6 = 64), an 8-bit panel renders 256 levels (2^8 = 256), and a 10-bit panel renders 1,024 levels (2^10 = 1,024). With three RGB channels, that's 262,000 / 16.7 million / 1.07 billion total colors. Higher bit depth means smoother gradients because each step is smaller and less perceptible.
6-bit panels are the cheapest, used in budget monitors and some laptops. They cannot render true 8-bit gradients — visible bands appear in smooth color ramps like skies and shadows. To compensate, manufacturers use FRC (frame rate control), a temporal dithering technique that rapidly flickers pixels between adjacent levels to simulate intermediate shades. From a normal viewing distance, FRC is invisible, making a 6-bit+FRC panel look like 8-bit. The spec sheet often says "16.7 million colors" even though the underlying panel is 6-bit.
8-bit panels are the standard for consumer monitors. They render 256 levels per channel — plenty for SDR gaming and general use. Smooth gradients look smooth, and only HDR content with its wider brightness range reveals 8-bit limits. Most users don't need more than 8-bit for SDR. 10-bit panels render 1,024 levels per channel — essential for HDR, photo editing, and video grading. Skies, shadows, and skin tones all show banding at 8-bit; 10-bit eliminates the issue. Professional monitors are 10-bit; consumer HDR displays should be 10-bit; budget monitors are usually 8-bit or 6-bit+FRC.
Run our color depth test to verify what your display actually is. Display the 256-step (8-bit) ramp — visible bands indicate 6-bit. Display the 1024-step (10-bit) ramp — if it looks smoother than 256-step, your display is true 10-bit; if it bands identically, you're limited to 8-bit. Look for FRC dithering noise at close range, which reveals 6-bit+FRC panels masquerading as 8-bit.
Verify your full pipeline supports the bit depth you need. A 10-bit monitor with an 8-bit GPU output still produces 8-bit color. Use DisplayPort 1.4 or HDMI 2.0+, enable 10-bit output in your GPU control panel, and use color-managed applications like Photoshop or DaVinci Resolve. Pair the color depth test with our color banding test and HDR test for a complete bit-depth audit.
Run the color depth test now
Free, no download, runs in any browser.
Browse all tools