Pink screen
Display a pure pink screen to test red+blue sub-pixel combinations, use as a creative ambient light, and catch cross-channel pixel defects.
What the pink screen reveals
Pink at #FF69B4 (hot pink / magenta) drives red at 100%, blue at 71%, and green at 41%. In color theory, magenta is a non-spectral color — there is no single wavelength of light that produces magenta. Instead, the brain invents the sensation of magenta when red and blue receptors fire without green. This makes the pink screen uniquely diagnostic for red+blue sub-pixel combinations.
Where yellow tests red+green and the pink screen tests red+blue, the two together cover both possible two-channel combinations that exclude one primary. If a pixel works correctly on yellow but fails on pink, the blue channel is the culprit. If it works on pink but fails on yellow, green is the issue.
Red+blue sub-pixel combo
Drives red and blue together without green. Defects that only manifest when red+blue fire together — invisible on red or blue alone — appear here.
Creative ambient lighting
Pink at low brightness is a popular accent light for streaming setups and gaming rooms — adds personality without overwhelming the space.
Photography backdrop
Pink provides a flattering portrait backdrop — warm enough for skin tones, saturated enough to add visual interest. Better than pure magenta for portraits.
Pink variants and their sub-pixel recipes
"Pink" covers a range of warm-magenta hues. Our screen uses hot pink (#FF69B4), but other pinks produce different sub-pixel combinations. The table below shows how each variant fires the RGB channels — useful if you're cross-referencing with other pink sources.
| Pink variant | Hex | Red | Green | Blue | Sub-pixel recipe |
|---|---|---|---|---|---|
| Hot pink (this screen) | #FF69B4 | 100% | 41% | 71% | R+moderate G+moderate B |
| Pure magenta | #FF00FF | 100% | 0% | 100% | R+B only, no G |
| Light pink | #FFB6C1 | 100% | 71% | 76% | R+high G+high B (near white) |
| Deep pink | #FF1493 | 100% | 8% | 58% | R+low G+moderate B |
| Salmon | #FA8072 | 98% | 50% | 45% | R+moderate G+moderate B (warm) |
How to use pink for red+blue combo testing
- 1
Run red and blue individually first
Establish baselines by running the red and blue screens separately. Note any defects — they'll also appear on pink. The point of comparison is to find defects that appear ONLY on pink, not on red or blue alone.
- 2
Display pink fullscreen at 100% brightness
Click the pink block above to enter fullscreen. Pink at 100% drives red, green, and blue in the hot-pink ratio, maximizing the visibility of any combination-specific issues.
- 3
Scan for defects and compare to baselines
Inspect the pink field for dark dots, color-shifted dots, or non-uniform patches. Cross-reference against your red and blue baselines — any defect appearing only on pink is a red+blue addressing issue.
- 4
Cross-check with yellow for full combo coverage
Switch to yellow (red+green). If yellow is clean but pink shows defects, the blue channel has a combination-specific issue. If both yellow and pink show defects at the same location, the red channel is the common factor.
Pink as creative ambient light and backdrop
Beyond technical testing, the pink screen has carved out a niche as a creative ambient light for streaming, gaming, and content creation. Pink lighting adds warmth and personality to a room without the harshness of pure red or the coolness of blue. Many Twitch streamers and YouTube creators use pink LED strips behind their monitors as "bias lighting" — the pink screen at low brightness produces a similar effect without any additional hardware.
For photography, pink works as a flattering portrait backdrop. Unlike pure magenta (which can look harsh and artificial), hot pink has enough green contribution to soften the hue and complement most skin tones. Position your subject 1–2 meters in front of a fullscreen pink at 60% brightness for a soft, romantic portrait effect — useful for engagement shoots, fashion content, or product photography aimed at female-skewing audiences.
For sub-pixel diagnostic purposes, pink fills the final gap in the two-channel combination matrix. The full sub-pixel test matrix is: 3 primaries (red, green, blue) + 3 secondaries (yellow = R+G, cyan = G+B, magenta/pink = R+B) + 1 all-channel (white) + 1 zero-channel (black) = 8 patterns. Our 10 solid color screens cover 7 of these 8 patterns (cyan is excluded), plus orange and gray for additional diagnostic value. For more on color mixing theory, see our [color science guide](/blog/color-science-explained) and the [color depth test](/color-depth-test).
Tips for pink lighting and combo testing
- For streaming ambient light: pink at 30–40% brightness behind the monitor adds personality to your stream background without washing out your face cam.
- For portrait photography: pink at 60% brightness 1–2 meters behind the subject produces a flattering romantic backdrop — better than pure magenta for skin tones.
- For combo sub-pixel testing: always test red and blue individually before pink — the comparison is what reveals cross-channel addressing faults.
- For night-shift workers: pink is warmer than white but still contains blue (unlike orange or red), so it's less sleep-friendly. Reserve pink for daytime ambient use.
- Avoid leaving pink static on an OLED for extended periods — the high red+blue contribution can cause temporary image retention that mimics burn-in.
Pink screen — common questions
Pair the pink screen with these tests
Red Screen
Isolates the red sub-pixel — one half of the pink combination.
Blue Screen
Isolates the blue sub-pixel — the other half of the pink combination.
Yellow Screen
The other secondary color — tests red+green without blue.
Purple Screen
Tests a different red+blue ratio (no green at all) for cross-checking pink.
Continue your display inspection
The pink screen tests red+blue sub-pixel combinations and serves as a creative ambient light. Open the full toolset to verify every channel combination and complete your pixel inspection.