purple screen

Purple screen

Display a pure purple screen to test red+blue sub-pixel combos, detect uneven OLED blue-emitter wear, and use as a violet ambient light.

#8B00FF
Click for Fullscreen
Purple screen · Press F11 for browser fullscreen

What the purple screen uniquely reveals

Purple at #8B00FF (true violet) drives red at 55% and blue at 100% while leaving green at 0%. Like pink, purple is a non-spectral color — there is no single wavelength of light that produces violet. The brain invents the sensation of violet when red and blue receptors fire without significant green stimulation. This makes the purple screen a powerful diagnostic for the red+blue sub-pixel combination at a different ratio than pink.

Where pink uses high red + moderate blue (R+B with red dominant), purple uses moderate red + high blue (R+B with blue dominant). Testing both pink and purple lets you distinguish red-dominant from blue-dominant combination faults — a level of diagnostic granularity that single-color tests cannot achieve.

01

Red+blue sub-pixel combo (blue-dominant)

Drives red and blue together with blue dominant. Defects that manifest only at this specific ratio — invisible on red, blue, or pink — appear here.

02

Uneven OLED sub-pixel wear

OLED blue emitters degrade fastest. A purple screen on an aged panel may show pinkish regions where blue has worn, revealing differential aging invisible on other patterns.

03

Violet ambient light

Purple at low brightness adds a moody, cinematic atmosphere to streaming setups and creative workspaces — popular as a complementary accent against warm backgrounds.

Pink vs purple: two red+blue combinations

Pink and purple are both red+blue combinations without green, but at different ratios. The table below breaks down the difference and what each tests.

AspectPink (#FF69B4)Purple (#8B00FF)Pure magenta (#FF00FF)
Red drive100%55%100%
Green drive41%0%0%
Blue drive71%100%100%
Dominant channelRedBlueTied
Best for testingRed-dominant combo faultsBlue-dominant combo faultsPure R+B addressing
Visual feelWarm, friendlyMoody, cinematicHarsh, electric

How to test for OLED blue-emitter wear with purple

  1. 1

    Display purple fullscreen at 100% brightness

    Click the purple block above to enter fullscreen. Set monitor brightness to 100% to maximize the visibility of any blue-channel wear against the bright purple field.

  2. 2

    Scan for pinkish patches

    On a healthy panel, purple should be uniformly violet. Look for any regions that appear pinker or more red — these are areas where blue emitters have worn more than red, leaving red relatively stronger.

  3. 3

    Cross-check with blue fullscreen

    Switch to blue (100% blue, no red or green). Areas that were pinkish on purple should appear darker on blue — confirming blue emitter wear. Compare brightness across regions to grade severity.

  4. 4

    Document with a long-exposure photo

    If you find uneven wear, photograph purple fullscreen with a 2–4 second exposure on a tripod. Long exposures exaggerate the variation and provide objective documentation for warranty claims.

Why purple is the diagnostic for blue-emitter wear on OLED

Of the three OLED emitter materials — red, green, and blue — blue degrades fastest. This is a fundamental materials-science limitation: blue OLED emitters (typically based on fluorescent rather than phosphorescent materials) have lower efficiency and shorter lifetimes than red and green. After 1,000–3,000 hours of use, blue output can drop 5–15% while red and green remain essentially unchanged.

Against a pure blue screen, this wear is invisible — you can't see a 10% reduction in blue brightness when the field is all blue. Against white, the wear shows up as a slight yellow tint (red+green stronger than blue), but this is subtle and easily confused with color-temperature calibration. Against purple, the wear is most diagnostic: a region with worn blue emitters will appear pinker (red dominant) than regions with healthy blue emitters, creating a visible non-uniformity that maps directly to blue-channel wear patterns.

If you're buying a used OLED monitor or TV, ask the seller to display purple fullscreen for 60 seconds. Uneven pinkish regions indicate blue wear from static content (status bars, channel logos, HUD elements). Even wear is acceptable and expected; uneven wear that maps to specific screen regions is a red flag for heavy static-content use. For a structured OLED inspection protocol, see our [OLED screen test guide](/oled-screen-test) and the [burn-in test](/burn-in-test), and for background on OLED emitter chemistry, the [Wikipedia article on OLED technology](https://en.wikipedia.org/wiki/OLED) is a good starting point.

Tips for purple-screen testing and ambient use

Tips
  • For OLED wear diagnosis: always cross-check purple against blue and white — purple alone can be ambiguous, but the three together provide a definitive picture.
  • For creative ambient light: purple at 20–30% brightness pairs beautifully with warm orange or amber accent lights for a complementary color scheme in streaming setups.
  • For pre-purchase used-OLED checks: ask the seller to display purple fullscreen for 60 seconds — uneven pinkish regions reveal blue wear from static content.
  • Avoid leaving purple static on an OLED for extended periods — the high blue contribution accelerates the very wear you're trying to detect.
  • For photography: purple at 50% brightness works as a dramatic backdrop for tech product shots or cyberpunk-themed portraits — better than pure magenta for skin-tone balance.

Purple screen — common questions

Pair the purple screen with these tests

Continue your display inspection

The purple screen tests the blue-dominant red+blue combination and reveals OLED blue-emitter wear. Open the full toolset to verify every channel combination and complete your pixel inspection.