Pixel Test

RGB Test

Test individual red, green, and blue sub-pixel channels. Fullscreen RGB patterns isolate each color to detect dead or stuck sub-pixels that hide on white.

RGB Sub-pixel Field
R
Red · 700nm · long wave
Mode
Channels: full-screen single channel test
Mixing: 3-circle additive blend visualization
Gradient: 256-step ramp per active channel
Channel Buttons
R: Red · 700nm · long wave
Color Basics
Red wavelength700 nm
Green wavelength546 nm
Blue wavelength436 nm
Additive modelRGB (light)
Subtractive modelCMYK (pigment)
Red sensitivity (L cones)75%
Green sensitivity (M cones)95%
Blue sensitivity (S cones)40%
Assessment
✓
Additive Color Test
Toggle channels to verify each sub-pixel responds. Pure white = all channels healthy.

Why use this pixel tool

Pure RGB primaries

100% red, green, and blue fullscreen patterns isolate each sub-pixel channel for defect detection.

Channel mix presets

Cyan (G+B), magenta (R+B), and yellow (R+G) reveal complementary channel failures.

Per-channel brightness ramp

Each primary ramped from 0% to 100% to spot per-channel clipping and uneven response.

Sub-pixel defects exposed

A dead green sub-pixel that hides on white shows as a magenta dot on green — instantly visible.

What is pixel

Every display pixel is made of three sub-pixels — red, green, and blue — each driven by its own transistor. RGB testing isolates each sub-pixel channel by displaying solid red, green, or blue fullscreens, making per-channel defects obvious. A dead green sub-pixel that's invisible on white becomes a glaring magenta dot on a green field.

Sub-pixel defects come in three types. Dead sub-pixels never illuminate, showing as black dots on the corresponding color. Stuck sub-pixels are locked on, showing as colored dots on black. Hot sub-pixels are always at full brightness, showing as bright dots on any color.

RGB testing is more thorough than white-only testing. A red sub-pixel defect may hide on white (where green and blue compensate) but leap out on a pure red field. To find every defect, you must test each channel individually, then the complementary mixes (cyan, magenta, yellow) to catch combinations.

How to test

  1. Step 1: Display pure red

    Open the test and select red. The entire screen becomes 100% red. Look for any black or differently-colored dots.

  2. Step 2: Display pure green

    Switch to green. The most perceptually sensitive channel — green defects are easiest to spot.

  3. Step 3: Display pure blue

    Switch to blue. Blue defects are hardest to see but still important to catch.

  4. Step 4: Test complementary mixes

    Cyan, magenta, and yellow reveal combination defects that hide on pure primaries.

  5. Step 5: Mark defects

    Place a sticky note on the bezel to mark any defect for warranty claims or pixel massager attempts.

Common causes of pixel issues

Manufacturing defects

A failed transistor on one sub-pixel leaves it permanently dark (dead) or permanently on (stuck).

Sub-pixel wear

Each sub-pixel degrades with use; bright static elements wear out faster, causing color shift over time.

Driver IC failures

Column or row driver failures can take out entire lines of sub-pixels, producing visible stripes on specific colors.

Connection damage

Physical impact can crack internal connections, producing new sub-pixel defects over time.

Frequently asked questions

Testing tips

  • Test all three primaries (R, G, B) — defects often hide on one channel only.
  • Green is the most perceptually sensitive channel; check it carefully.
  • Use complementary mixes (cyan, magenta, yellow) to catch combination defects.
  • Mark any defect with a sticky note on the bezel for warranty claims.

Related tools

RGB Channel Testing: Isolating Dead Sub-Pixels

You ran the dead pixel test and found nothing — your new monitor looks perfect. But you fire up a red screen for a quick double-check and spot a tiny black dot that wasn't visible on white. Congratulations, you've just discovered why RGB channel testing matters. Sub-pixel defects often hide on white but leap out on pure primary colors, and finding them requires testing each channel individually.

Every display pixel is made of three sub-pixels — red, green, and blue — each driven by its own transistor. When all three are at full brightness, you see white. When one fails (a dead sub-pixel), the other two compensate, and the result looks nearly identical to a working pixel. A dead green sub-pixel on white appears as a faint magenta dot — easy to miss. But on a pure green field, that same dead sub-pixel shows as a black hole — impossible to ignore.

Run our RGB test and cycle through pure red, green, and blue. Look for any dots that differ from the surrounding field. Black dots are dead sub-pixels; bright dots of the same color are hot sub-pixels; bright dots of a different color are stuck sub-pixels. Then switch to cyan, magenta, and yellow — the complementary mixes — to catch combination defects that hide on pure primaries. A defect invisible on red, green, and blue may leap out on cyan.

Green is the most perceptually sensitive channel because the human eye is most responsive to green light. Green sub-pixel defects are the easiest to spot but also the most visually distracting in normal use. Blue defects are the hardest to see because the eye is least sensitive to blue. Red defects fall in between. Test all three; don't skip blue just because it's harder to see.

If you find a defect, check your warranty terms. Manufacturer tolerances vary by ISO 9241-307 class — most allow 2-5 defective sub-pixels on standard panels, but premium displays and Apple products often have a zero-dead-pixel policy. For stuck sub-pixels, try a pixel massager (a tool that rapidly cycles colors to unstick the transistor) or gentle rubbing with a microfiber cloth. These work sometimes; don't expect miracles.

RGB testing is the most thorough way to verify panel quality. Pair it with our dead pixel test for white-field defects and color accuracy test for gamut verification. Five minutes of testing within the return window can save you months of regret — and a sub-pixel defect you spot on red but missed on white is still a defect you can return.

Run the rgb test now

Free, no download, runs in any browser.

Browse all tools